Conserte seus objetos Comunidade Loja

Minolta QTsi Maxxum Shutter Button Replacement

Introdução

Replace your broken shutter release button so that you can take pictures with your camera.

O que você precisa

  1. Minolta QTsi Maxxum Shutter Button Replacement, Shutter Button: passo 1, imagem 1 %32

    • Locate the battery compartment on the bottom panel of the camera.

    • Open the battery door by using a coin.

    • In the counterclockwise direction, twist the coin in the battery door groove to open it.

    Editar

  2. Minolta QTsi Maxxum Shutter Button Replacement: passo 2, imagem 1 %32

    • Two batteries are located inside the battery chamber.

    • Remove the two batteries from the battery chamber by picking them up.

    Editar

  3. Minolta QTsi Maxxum Shutter Button Replacement: passo 3, imagem 1 %32

    • There is a screw located underneath the batteries in the battery compartment.

    • Unscrew and remove the (1) black Phillips #00 5mm screw from the battery compartment.

    • Ensure good lighting before attempting to remove this screw because it is hard to see inside the compartment.

    Editar

  5. Minolta QTsi Maxxum Shutter Button Replacement: passo 4, imagem 1 %32

    • From underneath the flash assembly, remove the (1) black Phillips #00 5mm screw

    • Be careful because you can lose the screw

    Editar

  6. Minolta QTsi Maxxum Shutter Button Replacement: passo 5, imagem 1 %32

    • The only screws remaining that hold the top panel of the camera in place are located next to the view finder.

    • Remove the (2) black Phillips #00 5mm screws from both sides of the view finder.

    • Be careful because you can lose the screw

    Editar

  7. Minolta QTsi Maxxum Shutter Button Replacement: passo 6, imagem 1 %32 Minolta QTsi Maxxum Shutter Button Replacement: passo 6, imagem 2 %32

    • The top panel of the camera should now be easy to lift off. If it is not, make sure that all screws and attachments, listed in steps 1-5, have been removed.

    • Once all screws are removed, lift the top panel from the camera.

    • Be careful when removing the top panel because there are wires connected to it.

    Editar

  8. Minolta QTsi Maxxum Shutter Button Replacement: passo 7, imagem 1 %32

    • Use a metal spudger to push the button out of its socket so that you can place a new one in its place.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 4 outros contribuidores

Jordan Ellery

Membro desde: 10/10/16

388 Reputação

Autoria de 3 guias

Emblemas: 9

+6 outros emblemas

Equipe

Sam Houston State, Team 12-4, Blackburne Fall 2016 Membro de Sam Houston State, Team 12-4, Blackburne Fall 2016

SHSU-BLACKBURNE-F16S12G4

Membros da 4

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 9

Duração total: 487