Ir para o conteúdo principal

Milwaukee M12 2457-20 Disassembly

O que você precisa

  1. Milwaukee M12 2457-20 Disassembly, Housing: passo 1, imagem 1 %32 Milwaukee M12 2457-20 Disassembly, Housing: passo 1, imagem 2 %32
    • Unscrew the four M3 x 10 T-10 screws located on the neck.

  2. Milwaukee M12 2457-20 Disassembly: passo 2, imagem 1 %32 Milwaukee M12 2457-20 Disassembly: passo 2, imagem 2 %32
    • Remove the spring pin from the switch paddle and take off the switch paddle.

  3. Milwaukee M12 2457-20 Disassembly: passo 3, imagem 1 %32
    • Unscrew the four M2.6 x 14 ST T-8 screws located on the body.

    • Unscrew the M2.6 x 10 ST T-8 screw located underneath the switch paddle.

  4. Milwaukee M12 2457-20 Disassembly: passo 4, imagem 1 %32 Milwaukee M12 2457-20 Disassembly: passo 4, imagem 2 %32
    • Separate the two housing parts of the tool.

    • Remove the 3/8" yoke assembly and the motor assembly from the tool housing.

  5. Milwaukee M12 2457-20 Disassembly: passo 5, imagem 1 %32 Milwaukee M12 2457-20 Disassembly: passo 5, imagem 2 %32
    • Remove the drive pin connecting the 3/8" yoke assembly and the motor assembly.

    • Remove the crankshaft, planet gears, carrier assembly, and ring gear from the motor assembly.

    • Be aware that these parts are lubricated with grease.

  6. Milwaukee M12 2457-20 Disassembly: passo 6, imagem 1 %32
    • You have now successfully dismantled the device.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Peter Lizotte

Membro desde: 10/25/19

183 Reputação

Autoria de 1 guia

Equipe

UMass Dartmouth, Team S1-G6, O'Connell Fall 2019 Membro de UMass Dartmouth, Team S1-G6, O'Connell Fall 2019

UMASSD-O'CONNELL-F19S1G6

Membros da 3

1 Guia de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 19

Últimos 30 dias: 19

Duração total: 76