Conserte seus objetos Comunidade Loja

Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement

Introdução

The following repair guide shows how to remove and replace the chuck drive shaft in a Milwaukee Hex Impact Driver 2750-20.

O que você precisa

  1. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Outer Casing: passo 1, imagem 1 %32

    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

    Editar

  2. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement: passo 2, imagem 1 %32

    • Remove the drill casing to expose the drill's interior parts.

    Editar

  4. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: passo 3, imagem 1 %32 Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: passo 3, imagem 2 %32 Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: passo 3, imagem 3 %32

    • Pulling directly outward, remove the driver head from the motor assembly by picking it up out of the casing.

    Editar

  5. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement: passo 4, imagem 1 %32

    • Remove the drive shaft assembly from the motor coils.

    • There will be resistance when removing the drive shaft as there is magnetism working against you.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 11

Duração total: 738