Milwaukee 2704-20 Outer Case Replacement

Introdução

Not looking to replace your old drill but need to get into the internal components to fix a few things well this guide will show you just that. All that will be needed is a Phillips screwdriver and a flathead screwdriver.

O que você precisa

Passo 1 Outer Case

Milwaukee 2704-20 Outer Case Replacement, Outer Case: passo 1, imagem 1 %32

Milwaukee 2704-20 Outer Case Replacement, Outer Case: passo 1, imagem 2 %32

Remove the battery from the drill.

Editar

Passo 2

Milwaukee 2704-20 Outer Case Replacement: passo 2, imagem 3 %32

Remove the indicated screws (M3 x 16mm Pan Hd. ST T-10 Screws) with screwdriver.

Editar

Passo 3

Milwaukee 2704-20 Outer Case Replacement: passo 3, imagem 3 %32

Gently lift the cover off the drill. Be careful not to force it or damage any of the internal components.
If the cover doesn't come off easily, check for any clips or latches that may be holding it in place. These can usually be released by pressing them with a small flathead screwdriver.

Editar