Introdução

This guide will help locate the microphone for removal and/or repair.

Peças

Não são necessárias peças.

  1. Flip over the phone and then slide down the back cover with your thumb.
    • Flip over the phone and then slide down the back cover with your thumb.

  2. Lever out the battery from the phone using your thumb.
    • Lever out the battery from the phone using your thumb.

  3. Use a plastic opening tool to pry out the two tabs on the top corners of the battery compartment. Use a plastic opening tool to pry out the two tabs on the top corners of the battery compartment.
    • Use a plastic opening tool to pry out the two tabs on the top corners of the battery compartment.

  4. Gently pull off hinge cap piece from the the top of the phone.
    • Gently pull off hinge cap piece from the the top of the phone.

  5. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  6. Using a T6 Torx Screwdriver, remove the four 7.62mm screws around the corners of the battery compartment.
    • Using a T6 Torx Screwdriver, remove the four 7.62mm screws around the corners of the battery compartment.

  7. Open the phone and turn it on its side. Using a plastic opening tool, run along the seam located around the sides of the phone to pop the clips holding the casing to the frame.
    • Open the phone and turn it on its side.

    • Using a plastic opening tool, run along the seam located around the sides of the phone to pop the clips holding the casing to the frame.

  8. Using your hand, gently pull of the back panel from the bottom half of the phone.
    • Using your hand, gently pull of the back panel from the bottom half of the phone.

  9. Close the phone and place it on a flat surface.
    • Close the phone and place it on a flat surface.

    • Using a plastic opening tool or your finger, lift up the motherboard from the bottom casing.

    • Be careful when pulling up the board, as there is still a ribbon cable attached to the back of the board.

  10. On the underside of the motherboard, find the ribbon cable that attaches the board to the rest of the phone.
    • On the underside of the motherboard, find the ribbon cable that attaches the board to the rest of the phone.

    • Using a plastic opening tool, slowly detach the ribbon cable connector, then pull the motherboard away from the frame.

  11. Once the motherboard is moved out of the way, pry out the keypad with a plastic opening tool
    • Once the motherboard is moved out of the way, pry out the keypad with a plastic opening tool

  12. On the back of the separated battery compartment, locate the small speaker module in the lower left hand corner
    • On the back of the separated battery compartment, locate the small speaker module in the lower left hand corner

  13. Using a plastic opening tool, pry out the microphone from the bottom
    • Using a plastic opening tool, pry out the microphone from the bottom

Conclusão

To reassemble your device, follow these instructions in reverse order.

Andrew

Member since: 04-10-2010

361 reputação

4 Guides authored

Equipe

Cal Poly, Team 4-46, Amido Fall 2010 Membro de Cal Poly, Team 4-46, Amido Fall 2010

CPSU-AMIDO-F10S4G46

4 Membros

14 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Todo: 148