Introdução

This guide will show you how to remove the dashboard for a Mazda 323 Protege.

Peças

Não são necessárias peças.

  1. Upgrading your Dashboard or what ever, you might want to open your Dashboard, this is the Easy Way...
    • Upgrading your Dashboard or what ever, you might want to open your Dashboard, this is the Easy Way...

  2. Open your door, you will see a Plastic Cover, remove it with a screwdriver or by hand. Open your door, you will see a Plastic Cover, remove it with a screwdriver or by hand. Open your door, you will see a Plastic Cover, remove it with a screwdriver or by hand.
    • Open your door, you will see a Plastic Cover, remove it with a screwdriver or by hand.

  3. Remove the 3 screws holding the cover in place. Remove the 3 screws holding the cover in place. Remove the 3 screws holding the cover in place.
    • Remove the 3 screws holding the cover in place.

  4. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  5. Remove the 2 screws above of the Dashboard.
    • Remove the 2 screws above of the Dashboard.

  6. Now to the magic: usualy, one must remove the steering wheel in order to continue. There are 2 easy alternatives:
    • Now to the magic: usualy, one must remove the steering wheel in order to continue. There are 2 easy alternatives:

  7. Option 1: With height adjustable steering wheel: remove the screw holding the top steering column trim and lower the column to its lowest by releasing the lever. Remove the top steering column trim.
    • Option 1: With height adjustable steering wheel: remove the screw holding the top steering column trim and lower the column to its lowest by releasing the lever. Remove the top steering column trim.

  8. Option 2: Without height adjustable steering column: Remove all 4 screws of the steering column trim. Afterwards: remove the large golden screws. Be carefull whilst removing the last one: hold the column tight with one hand or it will fall, since it is screwed to nothing else. Option 2: Without height adjustable steering column: Remove all 4 screws of the steering column trim. Afterwards: remove the large golden screws. Be carefull whilst removing the last one: hold the column tight with one hand or it will fall, since it is screwed to nothing else.
    • Option 2: Without height adjustable steering column: Remove all 4 screws of the steering column trim. Afterwards: remove the large golden screws. Be carefull whilst removing the last one: hold the column tight with one hand or it will fall, since it is screwed to nothing else.

  9. After Option 1 or 2: Pull the trim out of its holding clips. Disconnect all wires, except for clock and hazard switch. Slowly remove the trim, in case of Option 1: you might have to slightly bend the trim, be carefull. Afterwards: Rotate the trim 180° around the clock wire.
    • After Option 1 or 2: Pull the trim out of its holding clips. Disconnect all wires, except for clock and hazard switch. Slowly remove the trim, in case of Option 1: you might have to slightly bend the trim, be carefull. Afterwards: Rotate the trim 180° around the clock wire.

  10. Finally: Remove the 4 screws holding the dashboard. Disconnect the 3 connectors and speed wire and you are done!
    • Finally: Remove the 4 screws holding the dashboard. Disconnect the 3 connectors and speed wire and you are done!

Conclusão

To reassemble your device, follow these instructions in reverse order.

Frank

Member since: 21-12-2017

169 reputação

Autoria de 1 guia

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 19

Últimos 30 dias: 80

Todo: 716