Introdução

This guide will show you how to properly replace the speaker for the the Mattel Loopz interactive game.

Use a No. 2 Phillips head screwdriver to take out the 1/4" screw that holds the battery cover in place on the bottom of the device.
  • Use a No. 2 Phillips head screwdriver to take out the 1/4" screw that holds the battery cover in place on the bottom of the device.

Adicionar comentário

Take out the 4 AA Batteries.
  • Take out the 4 AA Batteries.

Adicionar comentário

Remove red screw covers (13 total) using  spudger.
  • Remove red screw covers (13 total) using spudger.

Adicionar comentário

Remove the thirteen 12.7mm screws with a #1 Phillips screwdriver.
  • Remove the thirteen 12.7mm screws with a #1 Phillips screwdriver.

Adicionar comentário

Remove 6 white caps using spudger to reveal screws underneath.
  • Remove 6 white caps using spudger to reveal screws underneath.

Adicionar comentário

Remove the six 16mm screws with a #1 Phillips screwdriver.
  • Remove the six 16mm screws with a #1 Phillips screwdriver.

Adicionar comentário

Remove the white cover. Be sure to remove the front and the back.
  • Remove the white cover. Be sure to remove the front and the back.

Adicionar comentário

Remove the black, plastic cover to reveal the internal electronics as shown.
  • Remove the black, plastic cover to reveal the internal electronics as shown.

Adicionar comentário

Remove the two 6.4mm screws with a #1 Phillips screwdriver.
  • Remove the two 6.4mm screws with a #1 Phillips screwdriver.

Adicionar comentário

Remove the speaker as shown.
  • Remove the speaker as shown.

Adicionar comentário

Use a soldering iron to desolder the red and black speaker wires from the speaker.
  • Use a soldering iron to desolder the red and black speaker wires from the speaker.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Trevor Lasiter

Member since: 08-01-2018

219 reputação

Autoria de 1 guia

Equipe

IUPUI, Team S1-G2, Freund Spring 2018 Membro de IUPUI, Team S1-G2, Freund Spring 2018

IUPUI-FREUND-S18S1G2

3 Membros

2 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Todo: 31