Conserte seus objetos Comunidade Loja

Marvel iHome MR-M66 Power Switch Cover Replacement

Introdução

This guide will demonstrate how to access and replace the power switch cover of the Marvel iHome MR-M66.

O que você precisa

  1. Marvel iHome MR-M66 Power Switch Cover Replacement, Back Cover: passo 1, imagem 1 %32 Marvel iHome MR-M66 Power Switch Cover Replacement, Back Cover: passo 1, imagem 2 %32

    • Remove two of the three screws shown on the bottom of the device.

    • Begin removing the last screw, but leave it partially in the socket to remove the bottom cover easier.

    Editar

  2. Marvel iHome MR-M66 Power Switch Cover Replacement: passo 2, imagem 1 %32 Marvel iHome MR-M66 Power Switch Cover Replacement: passo 2, imagem 2 %32 Marvel iHome MR-M66 Power Switch Cover Replacement: passo 2, imagem 3 %32

    • Remove the bottom cover by either pulling on the screw or using a plastic opening tool to pry the cover off.

    • After removing the bottom cover, remove the two screws.

    Editar

  4. Marvel iHome MR-M66 Power Switch Cover Replacement: passo 3, imagem 1 %32 Marvel iHome MR-M66 Power Switch Cover Replacement: passo 3, imagem 2 %32 Marvel iHome MR-M66 Power Switch Cover Replacement: passo 3, imagem 3 %32

    • Use a spudger to release the small retaining clip that holds the feet to the bottom of the device.

    • Be careful here, as too much force can break the clip.

    • Remove the two screws from the back of the device.

    Editar

  5. Marvel iHome MR-M66 Power Switch Cover Replacement: passo 4, imagem 1 %32 Marvel iHome MR-M66 Power Switch Cover Replacement: passo 4, imagem 2 %32 Marvel iHome MR-M66 Power Switch Cover Replacement: passo 4, imagem 3 %32

    • Using a plastic opening tool and your hand, separate the front and back covers from each other.

    • Starting from the bottom, use the plastic opening tool to create the initial separation and continue along the seam to the top of the device.

    • This step requires the most time and patience, so be careful.

    • The power switch will most likely come loose during this step and you will hear something rattling inside the device.

    Editar

  6. Marvel iHome MR-M66 Power Switch Cover Replacement: passo 5, imagem 1 %32 Marvel iHome MR-M66 Power Switch Cover Replacement: passo 5, imagem 2 %32 Marvel iHome MR-M66 Power Switch Cover Replacement: passo 5, imagem 3 %32

    • Remove the two arms from either side of the device once a significant separation has been created.

    • They are not fixed to the body itself so you should be able to wiggle them free.

    • Continue pulling the back cover off the device.

    • Remove the red cover for the on/off switch from the device.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Aaram Williams

Membro desde: 03/08/17

201 Reputação

Autoria de 3 guias

Emblemas: 4

+1 outro emblema

Equipe

UMass Dartmouth, Team S5-G3, Botvin Spring 2017 Membro de UMass Dartmouth, Team S5-G3, Botvin Spring 2017

UMASSD-BOTVIN-S17S5G3

Membros da 3

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 4

Duração total: 78