Ir para o conteúdo principal

Manatee V2S Intelligent Clothes Dryer Filter Replacement

O que você precisa

  1. Manatee V2S Intelligent Clothes Dryer Filter Replacement, Filter: passo 1, imagem 1 %32
    • Turn the machine upside down.

  2. Manatee V2S Intelligent Clothes Dryer Filter Replacement: passo 2, imagem 1 %32
    • Use a Phillips #0 screwdriver to remove the 3.5 mm screw holding the bottom case to the device.

  3. Manatee V2S Intelligent Clothes Dryer Filter Replacement: passo 3, imagem 1 %32
    • Cut out about 10 cm of scotch tape.

    • Turn it over and go around your hand as shown in the image, which lets the adhesive side on the outside. (Because it is easy to remove dust)

    • You can also use any other ways to remove the dust, but make sure not to break the filter.

  4. Manatee V2S Intelligent Clothes Dryer Filter Replacement: passo 4, imagem 1 %32
    • Take out the filter.

    • Tap the dust and particles into the garbage, remove the dust with scotch tape, or replace the filter.

  5. Manatee V2S Intelligent Clothes Dryer Filter Replacement: passo 5, imagem 1 %32 Manatee V2S Intelligent Clothes Dryer Filter Replacement: passo 5, imagem 2 %32
    • Check for broken/loose wiring and other connections.

    • Dust may not be the only reason for the poor performance.

    • Close the lid and replace the screw.

Conclusão

To reassemble your device, follow these instructions in reverse order.

[deleted]

Membro desde: 09/17/21

121 Reputação

Autoria de 1 guia

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 20

Duração total: 493