Pular para o conteúdo principal

Introdução

This guide will show you the necessary steps to replace the forward/reverse switch. It shows how to remove the battery and the outer casing, in order to locate the forward/reverse switch on the drill.

Peças

Nenhum componente especificado.

  1. Hold the drill upright.
    • Hold the drill upright.

    • Place your finger on the white battery-release button.

  2. Press and hold the white release button located on the front of the battery.
    • Press and hold the white release button located on the front of the battery.

  3. Slide the battery forward while pressing down on the white battery-release button.
    • Slide the battery forward while pressing down on the white battery-release button.

  4. Apple Watch Kits

    Screen and battery repairs just got easier.

    Comprar agora

    Apple Watch Kits

    Screen and battery repairs just got easier.

    Comprar agora
  5. Hold the drill upright with the back panel facing you. Unscrew the two 18 mm screws  from the back panel using a Phillips PH2 screwdriver.
    • Hold the drill upright with the back panel facing you.

    • Unscrew the two 18 mm screws from the back panel using a Phillips PH2 screwdriver.

  6. Apply slight pressure to the sides of the backplate and pull away from the drill.
    • Apply slight pressure to the sides of the backplate and pull away from the drill.

  7. Unscrew the nine 18 mm screws from the outer casing using a Phillips PH2 screwdriver. Unscrew the nine 18 mm screws from the outer casing using a Phillips PH2 screwdriver.
    • Unscrew the nine 18 mm screws from the outer casing using a Phillips PH2 screwdriver.

  8. Apply slight pressure to the sides of the outer casing and pull away from the drill. Apply slight pressure to the sides of the outer casing and pull away from the drill.
    • Apply slight pressure to the sides of the outer casing and pull away from the drill.

  9. Pull the black trigger assembly away from the drill.
    • Pull the black trigger assembly away from the drill.

  10. Grab onto the forward/reverse switch. Gently pull the forward/reverse switch to separate it from the trigger assembly.
    • Grab onto the forward/reverse switch.

    • Gently pull the forward/reverse switch to separate it from the trigger assembly.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Eric Herwatt

Membro desde: 05-10-2016

849 reputação

7 Guias de autoria

Equipe

Cal Poly, Team 15-4, Livingston Fall 2016 Membro de Cal Poly, Team 15-4, Livingston Fall 2016

CPSU-LIVINGSTON-F16S15G4

4 Membros

7 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 12

Últimos 30 dias: 61

Todo: 2,100