Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Magic Bullet NutriBullet Rubber Gasket Replacement

O que você precisa

  1. Magic Bullet NutriBullet Rubber Gasket Replacement, Rubber Gasket: passo 1, imagem 1 %32
    • Separate the blending blade lid from the cup.

    I just purchased a 3 pk gasket and tried to instal it with no success ! I have a nutribullet is there any place I can have it install???

    Rose Coltess - Responder

  2. Magic Bullet NutriBullet Rubber Gasket Replacement: passo 2, imagem 1 %32 Magic Bullet NutriBullet Rubber Gasket Replacement: passo 2, imagem 2 %32
    • Using tweezers, grab the gasket at the indented lip which is located on the side of the blending blade.

    • Slowly pry the rubber gasket up.

    I am so bummed out as the rubber gasket just came off and I have tried until I have pain in my hands holding the the tweezers and

    the gasket and the part with the blades . I have only used my NutriBullet once and I am broken hearted. Any sugesstions? HELP

    Naomi Hewlett - Responder

    I am waiting for a call

    Naomi Hewlett - Responder

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Geary Yu

Membro desde: 01/22/15

1.208 Reputação

Autoria de 3 guias

Equipe

Cal Poly, Team 19-8, Maness Winter 2015 Membro de Cal Poly, Team 19-8, Maness Winter 2015

CPSU-MANESS-W15S19G8

Membros da 4

Autoria de 10 guias

10 comentários

The trouble is, this process doesn't work in reverse order as the gasket keeps popping up where you are not applying the pressure. You could do this all day and I'm sure it would be great therapy for OCD.

lizzywade888 - Responder

I want to replace the rubber gasket. My trouble is I can't find a gasket that states it will fit this model. magic Bullet NUTRIBULLET model number NB-WL007-02 Can you tell me where to purchase this? Thanks!

Marcia Sikes

today_first@cox.net

todayfirst - Responder

My understanding is that if it's leaking all the way into the base and not out the sides, it's likely not the main gasket (a faulty one of these would probably cause it to leak out the sides). This is a really good video that explains how to remove the blade and replace the washers that act as gaskets to stop liquid from dripping straight through the center/blade area.

https://www.youtube.com/watch?v=n0fiNRwh...

Tracy Hamilton - Responder

lizzywad is correct. The %#*@ thing wont stay in, it keeps popping out.  What else can be done?

deborah blair - Responder

The gasket in the Nutribullet has disappeared and I think it was blended into the fruit and veg . I drank half of it before I discovered it. I cannot find out if it is toxic or not. Geraldine

geraldine p - Responder

Are you still with us Geraldine? If so……not toxic.. c.2021

Seriously you may have removed it + forgotten or you may not be seeing it, it blends into the unit.

Rachael Mills -

The rubber gasket keeps popping out after each use. I have to replace it back in every time. Definitely a defect in design with no resolution.

carolyn.komer - Responder

I want to purchase rubber gasket of Magic bullet wonderchef nutriblend 400watt. How do I buy it?

Ferisha Nongkynrih - Responder

I have the original magic bullet with the white gasket rings. One side has a small “cut” as if to fit in a grove- so that’s the side I’ve been trying to put in, but it keeps falling out. I’ve tried a knife to push it in and it won’t screw in tight enough to even blend. I’ve tried the smooth end and the end with cut- any ideas on how to get the gasket back in?

Sheri Sergent - Responder

gasket makes the drink taste like rubber

William Parrish - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 7

Últimos 7 dias: 48

Últimos 30 dias: 221

Duração total: 33,424