Ir para o conteúdo principal

Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement

O que você precisa

  1. Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement, Rear and Side Case: passo 1, imagem 1 %32
    • Use tweezers to completely remove the sticker from the rear of controller.

  2. Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement: passo 2, imagem 1 %32
    • Find the seven 8.3 mm Phillips screws on the rear of the controller and remove them.

  3. Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement: passo 3, imagem 1 %32 Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement: passo 3, imagem 2 %32
    • Use a plastic opening tool to separate the rear and front casing by inserting it in-between the two cases.

    • Use the plastic opening tool to pry the two cases apart.

  4. Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement: passo 4, imagem 1 %32 Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement: passo 4, imagem 2 %32
    • Remove the two rubber side grips.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Jefferson Hsu

Membro desde: 09/18/12

411 Reputação

Autoria de 3 guias

Equipe

Cal Poly, Team 1-7, Propen Fall 2012 Membro de Cal Poly, Team 1-7, Propen Fall 2012

CPSU-PROPEN-F12S1G7

Membros da 4

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 3

Duração total: 929