Conserte seus objetos Comunidade Loja

Mad Catz Rock Band 4 Wireless Fender Whammy Bar Replacement

Introdução

The whammy bar on the Mad Catz Rock Band 4 Wireless Fender is the silver lever sticking out of the device to the left of the power button. It is possible for the whammy bar to break or become faulty, needing to be replaced.

Be sure to remove the batteries from the device before beginning.

O que você precisa

  1. Mad Catz Rock Band 4 Wireless Fender Whammy Bar Replacement, Outer Casing: passo 1, imagem 1 %32

    • Flip the guitar over so it is back side up. The battery compartment should be facing up.

    • Use a size J1 head screwdriver to remove the ten 5 mm short screws.

    • Use a J1 screwdriver to remove the four 5 mm long screws on the back of the device.

    Editar

  2. Mad Catz Rock Band 4 Wireless Fender Whammy Bar Replacement: passo 2, imagem 1 %32

    • Turn the device over so the front of the guitar is facing you.

    • Using a size J1 philips head screwdriver, remove the eleven 5 mm silver screws (circled in red) around the white panel.

    Editar

  3. Mad Catz Rock Band 4 Wireless Fender Whammy Bar Replacement: passo 3, imagem 1 %32

    • Gently lift the white panel and twist 90 degrees clockwise.

    • Using a size J1 head screwdriver, remove the two 5 mm black screws from underneath the white panel. You should now be able to pull the guitar apart.

    Editar

  5. Mad Catz Rock Band 4 Wireless Fender Whammy Bar Replacement, Whammy Bar: passo 4, imagem 1 %32

    • Using a size J1 philips head screwdriver, remove the four black 5 mm screws (circled in red) from the cover on the whammy bar component.

    Editar

  6. Mad Catz Rock Band 4 Wireless Fender Whammy Bar Replacement: passo 5, imagem 1 %32

    • Using your hands, pull off the black cover and put the spring that pops out aside.

    Editar

  7. Mad Catz Rock Band 4 Wireless Fender Whammy Bar Replacement: passo 6, imagem 1 %32

    • Using your hands, pull out the rectangular circuit board from the whammy bar component.

    Editar

  8. Mad Catz Rock Band 4 Wireless Fender Whammy Bar Replacement: passo 7, imagem 1 %32

    • Follow the cord for the circuit board from the whammy bar, and using your hands pull it out of the main circuit board.

    Editar

  9. Mad Catz Rock Band 4 Wireless Fender Whammy Bar Replacement: passo 8, imagem 1 %32

    • Pull out the whammy bar.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Catherine Lintner

Membro desde: 09/21/16

581 Reputação

Autoria de 4 guias

Emblemas: 15

+12 outros emblemas

Equipe

USF Tampa, Team 1-1, Cagle Fall 2016 Membro de USF Tampa, Team 1-1, Cagle Fall 2016

USFT-CAGLE-F16S1G1

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 14

Duração total: 1,607