Ir para o conteúdo principal
  1. Holding the clutch cover firmly, slide it towards the right display hinge. The clutch cover will move approximately 1 cm to the right. Do not force it pass this point.
    • Holding the clutch cover firmly, slide it towards the right display hinge.

    • The clutch cover will move approximately 1 cm to the right. Do not force it pass this point.

  2. Lifting the left edge of the clutch cover, gently rock it back and forth on its long axis while pulling it away from the display. Remove the clutch cover from the display, minding any cables that may get caught.
    • Lifting the left edge of the clutch cover, gently rock it back and forth on its long axis while pulling it away from the display.

    • Remove the clutch cover from the display, minding any cables that may get caught.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Brett Hartt

Membro desde: 12/04/2010

122.118 Reputação

143 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

140 Membros

17.046 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 75