Menu

Suas configurações

MacBook Pro 15" Unibody Early 2011 Hard Drive Replacement

Escrito Por: Walter Galan (e 4 outros contribuidores)
  • Comentários: 3
  • Favoritos: 1

Dificuldade

Moderado

Passos

4

Tempo necessário

Sugerir um tempo??

Seções

1

Sinalizadores

1

Prerequisite Only

Pré-requisito somente

Por favor, note que este guia é apenas um pré-requisito para outros guias.

Introdução

This guide is a prereq only.

Ferramentas

Comprar estas ferramentas

Peças

Nenhum componente especificado.

  1. Remove two Phillips screws securing the hard drive bracket to the upper case.

    • Remove two Phillips screws securing the hard drive bracket to the upper case.

    • These screws are captive to the hard drive bracket.

    Editar

  2. Lift the retaining bracket out of the upper case.

    • Lift the retaining bracket out of the upper case.

    Editar

  4. Lift the hard drive by its pull tab and pull it out of the chassis, minding the cable attaching it to the computer.

    • Lift the hard drive by its pull tab and pull it out of the chassis, minding the cable attaching it to the computer.

    Editar

  5. Remove the hard drive cable by pulling its connector straight away from the hard drive. Remove the hard drive cable by pulling its connector straight away from the hard drive.

    • Remove the hard drive cable by pulling its connector straight away from the hard drive.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 Comments

Adicionar um comentário

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 432