Conserte seus objetos Comunidade Loja

MacBook Pro 15" Unibody Early 2011 Battery Connector Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

Introdução

Disconnecting Battery Connector. Internal Prereq.

O que você precisa

  1. MacBook Pro 15" Unibody Early 2011 Battery Connector Replacement, Battery Connector: passo 1, imagem 1 %32 MacBook Pro 15" Unibody Early 2011 Battery Connector Replacement, Battery Connector: passo 1, imagem 2 %32

    • For certain repairs (e.g. hard drive), disconnecting the battery connector is not necessary but is recommended as it prevents any accidental shorting of electronics on the motherboard. If you do not disconnect the battery connector, please be careful as parts of the motherboard might be electrified.

    • Use the edge of a spudger to pry the battery connector upwards from its socket on the logic board.

    • It is useful to pry upward on both short sides of the connector to "walk" it out of its socket.

    Editar

  3. MacBook Pro 15" Unibody Early 2011 Battery Connector Replacement: passo 2, imagem 1 %32

    • Bend the battery cable slightly away from its socket on the logic board so it does not accidentally connect itself while you work.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 610