Introdução

While it may not be the first component that people gawk over when they see your fancy Retina display MacBook Pro, a nasty looking lower case can be a real eye-sore. Use this guide to help you replace a scratched, scuffed, bent or broken bottom panel.

  1. Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

      • Eight 3.0 mm

      • Two 2.3 mm

  2. Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

    • Set the lower case aside.

Conclusão

To reassemble your device, follow these instructions in reverse order.

21 outras pessoas concluíram este guia.

Brett Hartt

Member since: 12-04-2010

109.374 reputação

138 Guides authored

Equipe

iFixit Membro de iFixit

Community

108 Membros

7.528 Guides authored

i am willing to buy one backplate but i am unable to find somewhere on the internet to buy it, can some one please help me out with this? Thanks :D

Joan Manuel Rodriguez - Responder

Managed to clean six years worth of dust out, now the fans are much quieter! The keyboard is also cooler to the touch on idle. Thanks!

Austin Wang - Responder

Visualizar Estatísticas:

Últimas 24 horas: 16

Últimos 7 dias: 107

Últimos 30 dias: 429

Todo: 40,083