Pular para o conteúdo principal

Introdução

Pre-req only

Peças

Nenhum componente especificado.

  1. Peel back the warning label covering the battery connector.
    • Peel back the warning label covering the battery connector.

  2. Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board. Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.
    • Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

    • Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Brett Hartt

Membro desde: 12-04-2010

113.696 reputação

143 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

104 Membros

9.249 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Todo: 384