Conserte seus objetos Comunidade Loja

MacBook Pro 15" Retina Display Early 2013 I/O Board Cable Replacement

Introdução

Input, Output, Sideput. Whatever kind of puting you will be doing, a faulty I/O board cable is going to severely limit the functionality of your MacBook Pro with Retina display. This guide will show you how to replace it.

O que você precisa

  1. MacBook Pro 15" Retina Display Early 2013 I/O Board Cable Replacement, Lower Case: passo 1, imagem 1 %32

    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.0 mm

    • Two 2.3 mm

    Editar

  2. MacBook Pro 15" Retina Display Early 2013 I/O Board Cable Replacement: passo 2, imagem 1 %32

    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

    • Set the lower case aside.

    Editar

  4. MacBook Pro 15" Retina Display Early 2013 I/O Board Cable Replacement, Battery Connector: passo 3, imagem 1 %32

    • Peel back the warning label covering the battery connector.

    Editar

  5. MacBook Pro 15" Retina Display Early 2013 I/O Board Cable Replacement: passo 4, imagem 1 %32 MacBook Pro 15" Retina Display Early 2013 I/O Board Cable Replacement: passo 4, imagem 2 %32

    • Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

    • Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.

    Editar

  6. MacBook Pro 15" Retina Display Early 2013 I/O Board Cable Replacement, I/O Board Cable: passo 5, imagem 1 %32 MacBook Pro 15" Retina Display Early 2013 I/O Board Cable Replacement, I/O Board Cable: passo 5, imagem 2 %32 MacBook Pro 15" Retina Display Early 2013 I/O Board Cable Replacement, I/O Board Cable: passo 5, imagem 3 %32

    • Using the flat end of a spudger, pry the I/O board cable straight up out of its socket on the I/O board.

    • In a similar fashion, remove the I/O board cable from its socket on the I/O board.

    Editar

  7. MacBook Pro 15" Retina Display Early 2013 I/O Board Cable Replacement: passo 6, imagem 1 %32

    • Remove the I/O board cable from the MacBook Pro.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 2 outros contribuidores

Sam Goldheart

Membro desde: 10/18/12

465.656 Reputação

Autoria de 538 guias

Emblemas: 48

+45 outros emblemas

Equipe

iFixit Membro de iFixit

Staff

Membros da 135

Autoria de 16.734 guias

Um comentário

Will this work with a mid-2012 15” MacBook Pro Retina as well?

Andy - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 13

Últimos 30 dias: 17

Duração total: 4,042