Conserte seus objetos Comunidade Loja

MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement

Introdução

Remove the lower case to access the internal components of your MacBook Pro.

O que você precisa

  1. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement, Lower Case: passo 1, imagem 1 %32

    • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

    • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

    Editar

  3. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: passo 2, imagem 1 %32 MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: passo 2, imagem 2 %32

    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

85 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

Andrew Optimus Goldheart

Membro desde: 10/17/09

502.807 Reputação

Autoria de 407 guias

Emblemas: 44

+41 outros emblemas

Equipe

iFixit Membro de iFixit

Staff

Membros da 135

Autoria de 16.767 guias

7 comentários

When purchasing a new bottom panel, do any of the stickers or pads have to be transferred to the new part? How?

Matthew Parrott - Responder

This is the instructions on how to just remove the bottom cover to access other components. The part is sold here on iFixit for $99 and looks to include the rubber feet.

Cwoodyard -

Where can I get a new backover?

SkyGamer - Responder

The back cover is sold here and can be found at the top of the page.

Cwoodyard -

Can i buy this bottom replacement piece here or is this instructions on how to do it?

itsRadioBiz - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 8

Últimos 7 dias: 45

Últimos 30 dias: 138

Duração total: 64,908