Ir para o conteúdo principal

Introdução

Prereq for removing the upper case and battery.

  1. Use your thumb or finger to bend the plastic spring bar on the SSD tray, freeing the two clips at the front side of the device. While holding the spring bar depressed, tilt the SSD assembly up out of its cavity. While holding the spring bar depressed, tilt the SSD assembly up out of its cavity.
    • Use your thumb or finger to bend the plastic spring bar on the SSD tray, freeing the two clips at the front side of the device.

    • While holding the spring bar depressed, tilt the SSD assembly up out of its cavity.

  2. Remove the SSD assembly from the upper case.
    • Remove the SSD assembly from the upper case.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 425