Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement, Display Assembly: passo 1, imagem 1 %32 MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement, Display Assembly: passo 1, imagem 2 %32
    • Use a pair of tweezers to lift the rubber hinge covers up off the right and left display hinges.

  2. MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: passo 2, imagem 1 %32 MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: passo 2, imagem 2 %32
    • Remove the 3.2 mm T5 Torx screws (one on each side) securing the aluminum hinge brackets to the upper case.

  3. MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: passo 3, imagem 1 %32 MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: passo 3, imagem 2 %32
    • Use a pair of tweezers to lift aluminum hinge brackets off the right and left display hinges.

  4. MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: passo 4, imagem 1 %32 MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: passo 4, imagem 2 %32
    • Remove the four inner 5.3 mm T8 Torx screws (two on each side) securing the display to the upper case.

  5. MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: passo 5, imagem 1 %32 MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: passo 5, imagem 2 %32
    • Open the MacBook Pro approximately 110 degrees, and place it sideways on the table, as shown.

    • While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the lower display bracket.

    • Be sure to hold the display and upper case together with your left hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component.

    • Remove the last remaining T8 Torx screw securing the display to the upper case.

  6. MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: passo 6, imagem 1 %32 MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: passo 6, imagem 2 %32 MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement: passo 6, imagem 3 %32
    • Grip both halves of the device, one in each hand.

    • Gently push forward on the bottom half of the device to detach it from the display assembly.

    • Carefully set each component aside, making sure to set down the lower half keyboard-side down.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 57