Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

MacBook Pro 13" Retina Display Early 2013 Lower Case Replacement

O que você precisa

  1. MacBook Pro 13" Retina Display Early 2013 Lower Case Replacement, Lower Case: passo 1, imagem 1 %32
    Ferramenta utilizada nesse passo:
    Magnetic Project Mat
    $19.95
    Comprar
    • Remove the following ten screws securing the lower case to the upper case:

    • Two 2.3 mm P5 Pentalobe screws

    • Eight 3.0 mm P5 Pentalobe screws

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

  2. MacBook Pro 13" Retina Display Early 2013 Lower Case Replacement: passo 2, imagem 1 %32
    • Wedge your fingers between the upper case and the lower case.

    • Gently pull the lower case away from the upper case.

    • Remove the lower case and set it aside.

  3. MacBook Pro 13" Retina Display Early 2013 Lower Case Replacement: passo 3, imagem 1 %32 MacBook Pro 13" Retina Display Early 2013 Lower Case Replacement: passo 3, imagem 2 %32 MacBook Pro 13" Retina Display Early 2013 Lower Case Replacement: passo 3, imagem 3 %32
    • During reassembly, gently push down the center of the lower case to reattach the two plastic clips.

    • The lower case is connected to the upper case at the center, with two plastic clips.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

Sam Goldheart

Membro desde: 10/18/12

465.243 Reputação

Autoria de 538 guias

Equipe

iFixit Membro de iFixit

Staff

Membros da 136

Autoria de 16.562 guias

Um comentário

tell me the size of screw driver

nigamyadav56 - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 23

Duração total: 10,728