MacBook Air 13" Mid 2013 Display Screws Replacement

Introdução

prereq for removing IO board side display screws and heatsink screw

Remove the two 4.9 mm T8 Torx screws securing the antenna cable retainer on the left display hinge to the upper case.

Push the antenna cable retainer out of the way and remove the single 3 mm T5 Torx screw securing the end of the heat sink to the upper case.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Membro desde: 10/17/09

502.810 Reputação

Autoria de 407 guias

Staff

Membros da 135

Autoria de 16.817 guias