Ir para o conteúdo principal

Introdução

Prereq only

Peças

Nenhum componente especificado.

  1. Remove the four (two on each side) 6.5 mm T8 screws securing the hard drive to the drive tray. Remove the four (two on each side) 6.5 mm T8 screws securing the hard drive to the drive tray.
    • Remove the four (two on each side) 6.5 mm T8 screws securing the hard drive to the drive tray.

  2. Lift the hard drive up and remove it from the drive tray. During reassembly, be sure to thread the hard drive cable through the slot in the drive tray. During reassembly, be sure to thread the hard drive cable through the slot in the drive tray.
    • Lift the hard drive up and remove it from the drive tray.

    • During reassembly, be sure to thread the hard drive cable through the slot in the drive tray.

Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas concluíram este guia.

Sam Goldheart

Membro desde: 18/10/2012

448.183 Reputação

547 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

145 Membros

17.078 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Duração total: 1,792