Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

Prerequisite only

Peças

Nenhum componente especificado.

  1. Remove the two 12 mm T6 screws from the fan.
    • Remove the two 12 mm T6 screws from the fan.

    • Loosen the 27 mm T6 captive screw.

  2. The fan connector is trapped under the edge of the fan and cannot be disconnected until the fan is moved. Do not attempt to remove the fan entirely. Lift the fan straight up to free the captive screw from its hole in the logic board.
    • The fan connector is trapped under the edge of the fan and cannot be disconnected until the fan is moved.

    • Do not attempt to remove the fan entirely.

    • Lift the fan straight up to free the captive screw from its hole in the logic board.

    • Pull the fan away from the SSD until you can easily access the fan connector.

  3. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Confira os kits

    Enough RAM
    For All The Tabs

    Confira os kits
  4. Use the point of a spudger to lift the fan connector straight up out of its socket on the logic board. Use the point of a spudger to lift the fan connector straight up out of its socket on the logic board.
    • Use the point of a spudger to lift the fan connector straight up out of its socket on the logic board.

  5. Remove the fan from the Mac mini.
    • Remove the fan from the Mac mini.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Membro desde: 18/10/2012

417.579 Reputação

547 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

130 Membros

12.421 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 174