Ir para o conteúdo principal

MAGNAVOX MDV2300 Power Cord Replacement

O que você precisa

  1. MAGNAVOX MDV2300 Power Cord Replacement, Power Cord: passo 1, imagem 1 %32
    • Make sure the device is unplugged from the wall.

  2. MAGNAVOX MDV2300 Power Cord Replacement: passo 2, imagem 1 %32
    • Unscrew the two screws that hold together the top panel.

  3. MAGNAVOX MDV2300 Power Cord Replacement: passo 3, imagem 1 %32
    • Remove the top panel.

  4. MAGNAVOX MDV2300 Power Cord Replacement: passo 4, imagem 1 %32
  5. MAGNAVOX MDV2300 Power Cord Replacement: passo 5, imagem 1 %32 MAGNAVOX MDV2300 Power Cord Replacement: passo 5, imagem 2 %32
    • Remove disc drive by unscrewing the 2 screws that hold the drive in place.

  6. MAGNAVOX MDV2300 Power Cord Replacement: passo 6, imagem 1 %32
    • Identify the power cord.

    • The cord must either be too short or torn to warrant replacement.

  7. MAGNAVOX MDV2300 Power Cord Replacement: passo 7, imagem 1 %32
    • Cut the old wire out from the chip.

    • Attach the new wire into the housing.

    • Line up new wire with the appropriate holes and solder to board.

    • The white wire will be your neutral and the black wire will be your negative. View link of how to solder in order to replace the power cord. http://www.instructables.com/id/How-to-s...

Conclusão

After soldering, let cool and then reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Justin

Membro desde: 01/21/15

298 Reputação

Autoria de 2 guias

Equipe

Penn State, Team 1-41, Kaschak Winter 2015 Membro de Penn State, Team 1-41, Kaschak Winter 2015

PSU-KASCHAK-W15S1G41

Membros da 4

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 5

Duração total: 506