Dificuldade
Moderado
Passos
7
Tempo necessário
10 minutos
Texto confuso
Alguns dos textos deste guia é confuso, duplicado ou fora-tópico. Melhore-o!
Faltou uma etapa
Ops! Este guia está faltando alguns passos importantes.
Polícia gramatical
Abrace seu professor de Inglês interior e ajude a melhorar a gramática deste guia!
Balas!
Melhor coordenação com marcas e cor/tipo de balas ajudará a tornar mais claro este guia!
Introdução
This guide will show how to lubricate the volume slider after you have opened up the base of the phone. Your volume slider will operate smooth after completing this guide.
Ferramentas
Peças
Nenhum componente especificado.
-
-
Using a plastic opening tool, remove the phone cord from the phone jack from the base of the headset.
-
To release the cable gently, press down on the top plastic tab of the connector.
-
-
-
-
Locate the volume dial on the right side of the telephone.
-
Remove the volume dial by gently grasping the dial and pulling away from the base.
-
-
-
Remove the six screws from the base shell located on the back of the device.
-
Remove the three 12mm screws with the Philips head #1 screw driver.
-
Remove the three 18mm screws with the Philips head #1 screw driver.
-
-
-
Pry off the base shell using a plastic opener tool.
-
Set shell aside and you now have access to the internal components of the General Electric Telephone 2-9710A.
-
-
-
Turn the tuning slider counter clockwise all they way.
-
Apply lubricant to slider rail
-
Turn the tuning slider back and forth to distribute lubricant
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Equipe
Cal Poly, Team 16-59, Forte Fall 2012 Membro de Cal Poly, Team 16-59, Forte Fall 2012
CPSU-FORTE-F12S16G59
4 Membros
16 Guias de autoria
