Conserte seus objetos Comunidade Loja

Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement

O que você precisa

  1. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement, Dock Adapter Cover: passo 1, imagem 1 %32 Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement, Dock Adapter Cover: passo 1, imagem 2 %32 Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement, Dock Adapter Cover: passo 1, imagem 3 %32

    • To remove the plastic cover, use the plastic opening tool at the corner of the device.

    • Then insert the metal spudger in the opening and slowly move the metal spudger along all sides of the cover.

    • Caution: Metal spudger can damage the internal components of the device such as the motherboard. Make sure to use the metal spudger carefully to avoid any unnecessary damages.

    • Make sure the metal supdger is inserted deep enough as the cover is glued to the device.

    • Caution: Carefully remove the cover as it is easy to break.

    Editar

  2. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: passo 2, imagem 1 %32 Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: passo 2, imagem 2 %32

    • Remove the eight 10.5 mm Phillips #1 screws securing the cover.

    • Remove three 5.2 mm Philips #1 screws securing the dock.

    Editar

  4. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: passo 3, imagem 1 %32 Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: passo 3, imagem 2 %32

    • Use the metal spudger to loosen the front cover to get into the inner part of the device.

    • Metal spudger can damage the internal components of the device such as the motherboard. Make sure to use the metal spudger carefully to avoid any unnecessary damages.

    • Make sure to carefully lift up the front cover from the back cover.

    • There are wires connecting to between battery and the cover.

    Editar

  5. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: passo 4, imagem 1 %32 Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: passo 4, imagem 2 %32

    • Identify the small circuit board attached to the dock adapter cover.

    • remove two 2.5 mm Phillips #1 screws at the circuit board.

    Editar

  6. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: passo 5, imagem 1 %32 Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: passo 5, imagem 2 %32

    • Carefully take out the dock adapter cover from the device.

    • It might needs few try to pull out the small circuit board.

    • Take out the broken dock adapter cover and replace with the new one.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

ali alhashim

Membro desde: 07/18/18

121 Reputação

Autoria de 1 guia

Emblemas: 2

Equipe

IUPUI, Team S4-G4, Wilson Summer 2018 Membro de IUPUI, Team S4-G4, Wilson Summer 2018

IUPUI-WILSON-SU18S4G4

Membros da 4

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 7

Duração total: 812