Conserte seus objetos Comunidade Loja

Logitech MBJ58 Mouse Button Replacement

O que você precisa

  1. Logitech MBJ58 Mouse Button Replacement, Mouse button: passo 1, imagem 1 %32

    • Unfortunately, the left mouse button was 2x "sucked out" (button & the plastic pin over it)

    • Solution: Swap the button on the left with the mouse wheel button and - n small piece of office clip - for reinforcement - melt into the bottom of the pen.

    • YahooOoO - Looift widerer! Addendum: "mouse wheel click" Works by the way also - because there small springs ensure that the button does not "stick" in the pressed state

    Traduzir

    • Loosen the Phillips screw in the bottom.

    Traduzir

    • The plastic holder of the mouse buttons is loosened by carefully pressing the two plastic closures in the middle.

    • The motherboard is just plugged in and can be carefully removed forwards and upwards.

    Traduzir

    • Sensibly, first clean everything (dry).

    • Now click the button for "Links" with the button below the mouse wheel. The solder joints are huge and easy to get even for beginners.

    Traduzir

    • Everything should click together again and screws can be screwed back in. -> Loooift.

    Traduzir
Conclusão

Repeat the steps in reverse order to reassemble your device.

Uma outra pessoa concluiu este guia.

Um agradecimento especial a esses tradutores:

de en

100%

Corey Meyer

Annika Faelker

tayola

Estes tradutores estão nos ajudando a consertar o mundo! Quer contribuir?
Comece a traduzir ›

Autor(a)

com 1 outro contribuidor

Tho. Hummet

Membro desde: 04/05/18

121 Reputação

Autoria de 1 guia

Emblemas: 2

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 3

Últimos 30 dias: 4

Duração total: 302