Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

  1. The battery compartment cover is located on the top of the mouse. The seam running horizontally across the mouse is the top of the cover. There is a button to pop off the cover. It is located on the bottom of the mouse. you may need to press hard on this button to pop the cover. If the button does not work, you will need to pry off the cover. You can use your fingernails or a prying tool in order to do this, as seen in the third image.
    • The battery compartment cover is located on the top of the mouse. The seam running horizontally across the mouse is the top of the cover.

    • There is a button to pop off the cover. It is located on the bottom of the mouse. you may need to press hard on this button to pop the cover.

    • If the button does not work, you will need to pry off the cover. You can use your fingernails or a prying tool in order to do this, as seen in the third image.

  2. Remember to insert the new battery in the same orientation as the old one. The positive (plus) end should be facing away from the buttons.
    • Remember to insert the new battery in the same orientation as the old one. The positive (plus) end should be facing away from the buttons.

  3. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Comprar agora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Comprar agora
  4. The pads on the underside of the mouse hide the screws. Remove these first. You may need to use your fingernails or a prying tool. There will be two 0.5mm phillips head screws. Both will be underneath the bottom two pads.
    • The pads on the underside of the mouse hide the screws. Remove these first. You may need to use your fingernails or a prying tool.

    • There will be two 0.5mm phillips head screws. Both will be underneath the bottom two pads.

  5. Pry the top cover off. You may need to use a pry tool to help.
    • Pry the top cover off. You may need to use a pry tool to help.

  6. Unscrew the 0.25mm phillips head screw to release the circuit board. Unscrew the 0.25mm phillips head screw to release the circuit board.
    • Unscrew the 0.25mm phillips head screw to release the circuit board.

  7. The laser amplifier is not connected to the rest of the mouse and can simply be removed at this point. The laser amplifier is not connected to the rest of the mouse and can simply be removed at this point.
    • The laser amplifier is not connected to the rest of the mouse and can simply be removed at this point.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Hannah Pate

Membro desde: 30/01/2015

1.594 Reputação

7 Guias de autoria

Equipe

USF Tampa, Team 1-1, Watkins Winter 2015 Membro de USF Tampa, Team 1-1, Watkins Winter 2015

USFT-WATKINS-W15S1G1

4 Membros

13 Guias de autoria

Where i can buy mouse lenses for mk225

Cybermetz X - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 26

Duração total: 887