Introdução
The cord assembly is an important part of your controller. Your cord may become bent or damaged over time and need to be replaced.
Make sure to remove your device from power before starting.
O que você precisa
-
-
Unscrew the six 2 mm screws at the base.
-
Pull the base cover off with the suction handle
-
Unsolder the cords from the circuit board
-
-
Quase terminado!
To reassemble your device, follow these instructions in reverse order.
Conclusão
To reassemble your device, follow these instructions in reverse order.
Equipe
University of North Texas, Team S1-G3, Friess Fall 2019 Membro de University of North Texas, Team S1-G3, Friess Fall 2019
UNT-FRIESS-F19S1G3
Membros da 3
Autoria de 38 guias
