Introdução

This guide will allow you to remove and replace the speaker inside of the Logitech Circle. This guide is relatively simple, but requires the removal of several screws and gently prying out the speaker from the base. Be sure to keep the screws organized for easier reconstruction.

Peças

Não são necessárias peças.

Wedge the plastic opening tool under the black circle lens to gently pry it off. The lens is only attached with sticky tape and should remove relatively easily.
  • Wedge the plastic opening tool under the black circle lens to gently pry it off.

  • The lens is only attached with sticky tape and should remove relatively easily.

Adicionar comentário

Remove the four 3mm Phillips #0 screws that hold down the first ring.
  • Remove the four 3mm Phillips #0 screws that hold down the first ring.

Adicionar comentário

Remove the four 3mm Phillips #0 screws that hold down the second ring. Remove the four 3mm Phillips #0 screws that hold down the second ring.
  • Remove the four 3mm Phillips #0 screws that hold down the second ring.

Adicionar comentário

Remove the four 3mm Phillips #0 screws that hold down the final ring. Do not remove the lens/battery bundle yet. The lens/battery bundle is attached to the base by a ribbon cable that can break, so be very careful handling the circle.
  • Remove the four 3mm Phillips #0 screws that hold down the final ring. Do not remove the lens/battery bundle yet.

  • The lens/battery bundle is attached to the base by a ribbon cable that can break, so be very careful handling the circle.

Adicionar comentário

Gently remove the lens/battery bundle from the base of the circle, being mindful of the ribbon cable. Gently remove the lens/battery bundle from the base of the circle, being mindful of the ribbon cable.
  • Gently remove the lens/battery bundle from the base of the circle, being mindful of the ribbon cable.

Adicionar comentário

Gently pull the ribbon cable loose from the lens/battery bundle. While this is not an entirely necessary step, it helps to ensure the ribbon cable will not break during the rest of the replacement.
  • Gently pull the ribbon cable loose from the lens/battery bundle.

  • While this is not an entirely necessary step, it helps to ensure the ribbon cable will not break during the rest of the replacement.

Adicionar comentário

Locate the speaker attachment, and carefully remove the speaker plug from the lens.
  • Locate the speaker attachment, and carefully remove the speaker plug from the lens.

Adicionar comentário

Remove the speaker using a plastic opening tool. The battery is attached with glue, so use gentle prying motions to remove speaker.
  • Remove the speaker using a plastic opening tool. The battery is attached with glue, so use gentle prying motions to remove speaker.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Emma Cochran

Member since: 28-09-2017

110 reputação

Autoria de 1 guia

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 65