Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

Prerequisite-only guide to disconnect the logic board in a 2019 MacBook Air.

Peças

Nenhum componente especificado.

  1. Use a T3 Torx driver to remove the two 1.4 mm screws securing the trackpad connector bracket. Remove the trackpad connector bracket.
    • Use a T3 Torx driver to remove the two 1.4 mm screws securing the trackpad connector bracket.

    • Remove the trackpad connector bracket.

  2. Use the flat end of a spudger to pry the trackpad cable connector up and out of its socket. Use the flat end of a spudger to pry the trackpad cable connector up and out of its socket.
    • Use the flat end of a spudger to pry the trackpad cable connector up and out of its socket.

  3. Slide the tip of a spudger underneath the speaker cable and pry straight up to disconnect the speaker. With the connector disconnected, slide the flat end of a spudger under the cable to separate the adhesive securing the cable to the logic board. With the connector disconnected, slide the flat end of a spudger under the cable to separate the adhesive securing the cable to the logic board.
    • Slide the tip of a spudger underneath the speaker cable and pry straight up to disconnect the speaker.

    • With the connector disconnected, slide the flat end of a spudger under the cable to separate the adhesive securing the cable to the logic board.

  4. Use a T3 Torx driver to remove the two 1.3 mm screws securing the USB-C port connector bracket. Remove the USB-C connector bracket.
    • Use a T3 Torx driver to remove the two 1.3 mm screws securing the USB-C port connector bracket.

    • Remove the USB-C connector bracket.

  5. Use the flat end of a spudger to pry the USB-C cable connector up and out of its socket on the logic board. Use the flat end of a spudger to pry the USB-C cable connector up and out of its socket on the logic board.
    • Use the flat end of a spudger to pry the USB-C cable connector up and out of its socket on the logic board.

  6. Use a spudger to lift up the small locking flap on the sound board cable's ZIF connector. Slide the sound board cable out of the ZIF connector. Slide the sound board cable out of the ZIF connector.
    • Use a spudger to lift up the small locking flap on the sound board cable's ZIF connector.

    • Slide the sound board cable out of the ZIF connector.

  7. Peel back the black tape covering the fan cable connector.
    • Peel back the black tape covering the fan cable connector.

  8. Use the tip of a spudger to lift up the locking flap on the fan cable's ZIF connector. Slide the fan cable out of the ZIF connector. Slide the fan cable out of the ZIF connector.
    • Use the tip of a spudger to lift up the locking flap on the fan cable's ZIF connector.

    • Slide the fan cable out of the ZIF connector.

  9. Use a T3 Torx driver to remove the two 1.4 mm screws securing the antenna cable bracket. Remove the antenna cable bracket.
    • Use a T3 Torx driver to remove the two 1.4 mm screws securing the antenna cable bracket.

    • Remove the antenna cable bracket.

  10. Insert the point of a spudger under one of the antenna cables close to the connector. Pry straight up to disconnect the cable. Repeat for the other antenna cable. Repeat for the other antenna cable.
    • Insert the point of a spudger under one of the antenna cables close to the connector. Pry straight up to disconnect the cable.

    • Repeat for the other antenna cable.

  11. Use a T3 Torx driver to remove the two 1.5 mm screws securing the display cable connector bracket. Remove the display cable connector bracket.
    • Use a T3 Torx driver to remove the two 1.5 mm screws securing the display cable connector bracket.

    • Remove the display cable connector bracket.

  12. Use the flat end of a spudger to pry up the display cable connector. Use the flat end of a spudger to pry up the display cable connector.
    • Use the flat end of a spudger to pry up the display cable connector.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

Membro desde: 11/04/2015

124.290 Reputação

364 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

134 Membros

14.665 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 46