Ir para o conteúdo principal

Introdução

Follow this guide to replace the fan on a Little Wonder GX270 blower with Honda engine.

  1. Before you begin, ensure that the engine is off and cool to the touch. Before you begin, ensure that the engine is off and cool to the touch.
    • Before you begin, ensure that the engine is off and cool to the touch.

  2. Locate the gas cutoff valve and flip the switch to the left to shut it. Locate the gas cutoff valve and flip the switch to the left to shut it.
    • Locate the gas cutoff valve and flip the switch to the left to shut it.

  3. Grab the plastic housing at the end of the spark plug wire. Pull firmly to disconnect the wire from the spark plug.
    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  4. Use a 1/2 inch wrench to remove the intake guard bolt behind the front wheel.
    • Use a 1/2 inch wrench to remove the intake guard bolt behind the front wheel.

  5. Use a 1/2 inch socket to remove the five bolts securing the intake guard. Use a 1/2 inch socket to remove the five bolts securing the intake guard.
    • Use a 1/2 inch socket to remove the five bolts securing the intake guard.

  6. Remove the intake guard. Remove the intake guard.
    • Remove the intake guard.

  7. Use an impact wrench to remove the 5/8 inch bolt securing the fan blade to the spindle. Use an impact wrench to remove the 5/8 inch bolt securing the fan blade to the spindle.
    • Use an impact wrench to remove the 5/8 inch bolt securing the fan blade to the spindle.

  8. Remove the fan plug bolt and fan plug. Remove the fan plug bolt and fan plug.
    • Remove the fan plug bolt and fan plug.

  9. Remove the fan blade. Remove the fan blade.
    • Remove the fan blade.

  10. Use a pair of pliers to remove the key from the spindle. Use a pair of pliers to remove the key from the spindle.
    • Use a pair of pliers to remove the key from the spindle.

  11. Remove the fan spacer. Wipe the old grease off the spindle with a shop towel and apply new grease before installing the replacement parts.
    • Remove the fan spacer.

    • Wipe the old grease off the spindle with a shop towel and apply new grease before installing the replacement parts.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Sam Omiotek

Membro desde: 25/02/2019

36.401 Reputação

233 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

139 Membros

15.650 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 204