Ir para o conteúdo principal

Introdução

Follow this guide to replace the deflector knob on a Little Wonder GX270 Maximum Output Blower.

Ferramentas

Nenhuma ferramenta especificada.

  1. Before you begin, ensure that the engine is off and cool to the touch. Before you begin, ensure that the engine is off and cool to the touch.
    • Before you begin, ensure that the engine is off and cool to the touch.

  2. Locate the gas cutoff valve and flip the switch to the left to shut it. Locate the gas cutoff valve and flip the switch to the left to shut it.
    • Locate the gas cutoff valve and flip the switch to the left to shut it.

  3. Grab the plastic housing at the end of the spark plug wire. Pull firmly to disconnect the wire from the spark plug.
    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  4. Turn the deflector knob counterclockwise to unscrew and remove it.
    • Turn the deflector knob counterclockwise to unscrew and remove it.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Sam Omiotek

Membro desde: 25/02/2019

36.326 Reputação

233 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

139 Membros

15.644 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 85