Introdução

Will your groovy disco ball not turn on? This guide will teach you to remove and replace the switch so you can get back to your partying.

  1. Unplug the device to avoid injury.
    • Unplug the device to avoid injury.

    • Use a Phillips head screwdriver to unscrew the single screw.

    • Hold on to the nut from the other side so you do not lose it.

    • Remove the panel that conceals the switch.

    Adicionar comentário

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Hold on to the red disc with needle nosed pliers, and use the Phillips head screwdriver to remove the disc by pushing down.
    • Hold on to the red disc with needle nosed pliers, and use the Phillips head screwdriver to remove the disc by pushing down.

    Adicionar comentário

    • Remove and replace the white switch.

      • Do not be afraid to pull as this takes a bit of force to remove.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Courtney Elliott

Member since: 14-01-2014

354 reputação

3 Guides authored

Equipe

Cal Poly, Team 17-3, Forte Winter 2014 Membro de Cal Poly, Team 17-3, Forte Winter 2014

CPSU-FORTE-W14S17G3

5 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 11

Todo: 448