Introdução

Has your disco ball stopped rotating and turned into a weird, multi-colored lamp? Use this guide to avoid the party-foul and get that ball spinning!

Peças

  1. Turn the device over so that the base is on top.
    • Turn the device over so that the base is on top.

    Adicionar comentário

  2. Peel off the piece of metal that is glued to hold the two halves of the base together.
    • Peel off the piece of metal that is glued to hold the two halves of the base together.

    • You may need rubber cement to reapply the piece of metal when reassembling the device.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unscrew the four 10mm Phillips head screws on the bottom of the device.

    • Once the base is removed, the device should look as shown on the picture.

    Adicionar comentário

    • Use a pair of tweezers to crush the sides of the wirenuts.

    • The wirenuts are crimped to lock the wires in place. Usually the wires are just twisted into them.

    • Pull all of the wires out of the wirenuts.

    Adicionar comentário

    • Separate the wires that belong to the motor.

    • The wires should be small and black.

    • Remove the motor.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order, starting from step five.

Uma outra pessoa concluiu este guia.

Courtney Elliott

Member since: 14-01-2014

354 reputação

3 Guides authored

Equipe

Cal Poly, Team 17-3, Forte Winter 2014 Membro de Cal Poly, Team 17-3, Forte Winter 2014

CPSU-FORTE-W14S17G3

5 Membros

7 Guides authored

Where can you find a replacement motor?

bellyjb - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 17

Todo: 1,301