Ir para o conteúdo principal

Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal

O que você precisa

  1. Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal, Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: passo 1, imagem 1 %32
    • Turn the device over so that the base is on top.

  2. Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: passo 2, imagem 1 %32
    • Peel off the piece of metal that is glued to hold the two halves of the base together.

    • You may need rubber cement to reapply the piece of metal when reassembling the device.

  3. Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: passo 3, imagem 1 %32 Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: passo 3, imagem 2 %32
    • Unscrew the four 10mm Phillips head screws on the bottom of the device.

    • Once the base is removed, the device should look as shown on the picture.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Nick Kaprielian

Membro desde: 01/14/14

525 Reputação

Autoria de 4 guias

Equipe

Cal Poly, Team 17-3, Forte Winter 2014 Membro de Cal Poly, Team 17-3, Forte Winter 2014

CPSU-FORTE-W14S17G3

Membros da 5

Autoria de 7 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 531