Ir para o conteúdo principal

Lifetime 4-Foot Adjustable Table Leg Replacement

O que você precisa

  1. Lifetime 4-Foot Adjustable Table Leg Replacement, Leg: passo 1, imagem 1 %32 Lifetime 4-Foot Adjustable Table Leg Replacement, Leg: passo 1, imagem 2 %32 Lifetime 4-Foot Adjustable Table Leg Replacement, Leg: passo 1, imagem 3 %32
    • Use the 6 mm Flathead screwdriver to remove the four aluminum slotted screws located on the edges of the table.

    • Use a 5/32" Allen Wrench or 19 mm wrench to remove the two stainless 8-18 steel hex screws from the braces of the table.

  2. Lifetime 4-Foot Adjustable Table Leg Replacement: passo 2, imagem 1 %32 Lifetime 4-Foot Adjustable Table Leg Replacement: passo 2, imagem 2 %32 Lifetime 4-Foot Adjustable Table Leg Replacement: passo 2, imagem 3 %32
    • Clean any glue or adhesive from the braces and hinges before putting it into place.

    • It’s important to clear the screw holes of any material, so that the screws can fit without obstruction.

  3. Lifetime 4-Foot Adjustable Table Leg Replacement: passo 3, imagem 1 %32 Lifetime 4-Foot Adjustable Table Leg Replacement: passo 3, imagem 2 %32 Lifetime 4-Foot Adjustable Table Leg Replacement: passo 3, imagem 3 %32
    • Align the screw holes of the braces with the new leg by inserting it into the frame.

    • While aligning, make sure the new leg fits into the frame slots.

  4. Lifetime 4-Foot Adjustable Table Leg Replacement: passo 4, imagem 1 %32 Lifetime 4-Foot Adjustable Table Leg Replacement: passo 4, imagem 2 %32 Lifetime 4-Foot Adjustable Table Leg Replacement: passo 4, imagem 3 %32
    • Place the two stainless steel hex screws inside of the screw holes located on the leg, and secure each screw with your Allen key or wrench.

  5. Lifetime 4-Foot Adjustable Table Leg Replacement: passo 5, imagem 1 %32 Lifetime 4-Foot Adjustable Table Leg Replacement: passo 5, imagem 2 %32 Lifetime 4-Foot Adjustable Table Leg Replacement: passo 5, imagem 3 %32
    • Screw the four slotted screws back into the frame using a 6 mm flathead screwdriver. Ensure that the entire side where the new leg is being inserted is securely connected to the table once again.

  6. Lifetime 4-Foot Adjustable Table Leg Replacement: passo 6, imagem 1 %32
    • Test out the table by unfolding it, and setting it up in a standing position.

    • If the leg is not aligned properly, has loose screws, or missing some screws, make the proper adjustments before using it.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Aphason Aberham

Membro desde: 09/11/23

133 Reputação

Autoria de 1 guia

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 14

Últimos 30 dias: 63

Duração total: 243