Conserte seus objetos Comunidade Loja

Les Paul Wireless Guitar Peripheral Fret Buttons Replacement

Introdução

This guide will demonstrate how to open the neck of the guitar and replace the fret buttons, the colored buttons on the neck that correspond to the notes in the game.

O que você precisa

  1. Les Paul Wireless Guitar Peripheral Fret Buttons Replacement, Fret Buttons: passo 1, imagem 1 %32

    • Pull the Lock on the back of the body to detach the neck from the body.

    Editar

  2. Les Paul Wireless Guitar Peripheral Fret Buttons Replacement: passo 2, imagem 1 %32 Les Paul Wireless Guitar Peripheral Fret Buttons Replacement: passo 2, imagem 2 %32

    • Remove the 10 screws (each are 1 cm long) on the back of the neck using a T-10 Torx security screwdriver.

    • Remove the back of the neck.

    Editar

  4. Les Paul Wireless Guitar Peripheral Fret Buttons Replacement: passo 3, imagem 1 %32 Les Paul Wireless Guitar Peripheral Fret Buttons Replacement: passo 3, imagem 2 %32

    • Unscrew the two screws on the fret PCB using a PH1 Phillips head screwdriver. Each screw is 0.8 cm.

    • Remove the fret PCB

    • The fret PCB is in very tight. Be careful not to break it.

    • The connector from the neck to the body can easily slide out of place. Make sure it is in position before closing the neck

    Editar

  5. Les Paul Wireless Guitar Peripheral Fret Buttons Replacement: passo 4, imagem 1 %32

    • Remove the blue fret button pad.

    • This pad should not be attached in any way

    Editar

  6. Les Paul Wireless Guitar Peripheral Fret Buttons Replacement: passo 5, imagem 1 %32 Les Paul Wireless Guitar Peripheral Fret Buttons Replacement: passo 5, imagem 2 %32

    • The fret buttons should now easily slide out.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

6 outras pessoas executaram este guia.

Autor(a)

com 6 outros contribuidores

Chris

Membro desde: 10/18/13

881 Reputação

Autoria de 6 guias

Emblemas: 14

+11 outros emblemas

Um comentário

There are actually 12 screws in Step2. Just in case anyone is confused by that; starting from the right side we have a pair lined horizontally, pair lined vertically, pair lined horizontally....

The two that are vertically between the other two pairs, are not marked in the photo.

Vynneve - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 25

Últimos 30 dias: 107

Duração total: 20,662