Introdução

This guide shows how to properly remove the bottom case.

Start by flipping the device over so that you see the screws. Remove 7 Torx T5 short screws. Remove 3 Torx T5 long screws.
  • Start by flipping the device over so that you see the screws.

  • Remove 7 Torx T5 short screws.

  • Remove 3 Torx T5 long screws.

Adicionar comentário

  • starting from the USB port use your opening tool to gently pry up the case.

    • Make sure you are prying on the cover itself, not the metal shield around the USB port.

  • Pry along the laptop in the orders the arrows show.

    • Do NOT pry along the top side, or you risk damaging the casing. Stay with the arrows.

Adicionar comentário

Lift the case from the bottom side. NOT the side with the hinges. When you feel resistance, do NOT keep lifting or you will damage the housing. Once you feel resistance, gently pull the case towards you. (away from the hinges.)
  • Lift the case from the bottom side. NOT the side with the hinges.

    • When you feel resistance, do NOT keep lifting or you will damage the housing.

  • Once you feel resistance, gently pull the case towards you. (away from the hinges.)

  • Remove the case.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Aiden Baker

Member since: 19-09-2015

9.399 reputação

29 Guides authored

Equipe

Cooperators Membro de Cooperators

Community

14 Membros

77 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 28

Últimos 30 dias: 123

Todo: 892