Ir para o conteúdo principal

Introdução

This guide will teach you to remove and replace your trackpad.

  1. Ensure your device is completely OFF before starting this guide.
    • Ensure your device is completely OFF before starting this guide.

    • Use a Torx T4 screwdriver to unscrew the nine 5 mm screws holding the cover in place.

    • Use a Torx T4 screwdriver to unscrew the 8 mm screw in the center.

    • When, reassembling, make sure not to tighten the screws too much or you may risk cracking the plastic cover.

  2. Use the plastic opening tool to pry the cover up and away from the laptop, starting at one end and working your way around the cover. The cover is large and flat and made of thin plastic. It cracks easily, so make sure not to pry too hard. The cover is large and flat and made of thin plastic. It cracks easily, so make sure not to pry too hard.
    • Use the plastic opening tool to pry the cover up and away from the laptop, starting at one end and working your way around the cover.

    • The cover is large and flat and made of thin plastic. It cracks easily, so make sure not to pry too hard.

  3. Use a Phillips #00 screwdriver to remove the four 3 mm screws holding the battery in place. Be careful not to cross-thread the screws. Also, don't let the screws fall down into the laptop case.
    • Use a Phillips #00 screwdriver to remove the four 3 mm screws holding the battery in place.

    • Be careful not to cross-thread the screws. Also, don't let the screws fall down into the laptop case.

  4. Use your fingers or an opening tool to slide the battery connector out of its motherboard socket. Use your fingers or an opening tool to slide the battery connector out of its motherboard socket.
    • Use your fingers or an opening tool to slide the battery connector out of its motherboard socket.

  5. Remove the battery.
    • Remove the battery.

  6. Use the Phillips #1 screwdriver to take off the three 3mm screws.
    • Use the Phillips #1 screwdriver to take off the three 3mm screws.

  7. Grip the blue tab and pull out. Careful to not pull too hard, there is a chance of damaging the tab.
    • Grip the blue tab and pull out.

    • Careful to not pull too hard, there is a chance of damaging the tab.

  8. Lift off the layer of tape from the trackpad. Lift off the layer of tape from the trackpad.
    • Lift off the layer of tape from the trackpad.

  9. Push out the trackpad.
    • Push out the trackpad.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Chuefeng Vang

Membro desde: 01/11/2018

136 Reputação

Autoria de 1 guia

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 3

Últimos 30 dias: 26

Duração total: 857