Pular para o conteúdo principal

Introdução

This guide will help you replace the hard drive of your device. You'll need to spend some time unscrewing a numerous amount of schools from the device.

Peças

Nenhum componente especificado.

  1. Flip the device so the back is facing you.
    • Flip the device so the back is facing you.

    • Using the Phillips #0 screwdriver, unscrew the fourteen screws from the device.

  2. Use the blue Opening Tool to pry-open the back cover.
    • Use the blue Opening Tool to pry-open the back cover.

    • Slide it around the perimeter of the PC freeing the back cover.

    • Remove the back cover from the device.

  3. Use the Phillips #0 screwdriver to unscrew the four screws.
    • Use the Phillips #0 screwdriver to unscrew the four screws.

  4. Disconnect the hard drive from the motherboard.
    • Disconnect the hard drive from the motherboard.

  5. Use the Phillips #0 screwdriver to unscrew the four screws on the sides of the hard drive frame.
    • Use the Phillips #0 screwdriver to unscrew the four screws on the sides of the hard drive frame.

    • Remove the hard drive from the frame.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 10

Últimos 30 dias: 46

Todo: 486