Lenovo ThinkPad Yoga 370 Fan Replacement

Introdução

The internal computer fan is an important component meant to cool the other internal components by drawing in cool air and dispelling hot air. When the fan breaks or becomes dysfunctional the laptop may be prone to overheating and crashing under normal work conditions. This guide will show step-by-step instructions on how to replace the fan in the Lenovo ThinkPad Yoga 370.

O que você precisa

Passo 1 Battery

Lenovo ThinkPad Yoga 370 Fan Replacement, Battery: passo 1, imagem 1 %32

Device needs to be powered off and unplugged.
Remove the stylus from the device and set it aside.

Editar

Passo 2

Using the Phillips #00 screwdriver unscrew the eight circled 4mm screws until you hear a click.
The screws will remain attached to the back cover.

Editar

Passo 3

Note that while the screws are undone, the bottom cover is still attached by several plastic clips around the edges.
Using the plastic opening tool, work around the edges of the bottom cover to undo the plastic clips.

Editar

Passo 4

Gently remove the cover by placing your fingers around the edges.

Editar

Passo 5

Lenovo ThinkPad Yoga 370 Fan Replacement: passo 5, imagem 3 %32

With your fingers, fold back the plastic cover highlighted.
Using two fingers, gently remove the battery connectors.

Editar

Passo 6

Lenovo ThinkPad Yoga 370 Fan Replacement: passo 6, imagem 3 %32

Using the Phillips #00 screwdriver, remove the two 4mm screws.
Remove the battery.
Make sure to only replace with a battery that matches your computer, any other battery could ignite or explode.

Editar

Passo 7 Fan

Lenovo ThinkPad Yoga 370 Fan Replacement, Fan: passo 7, imagem 1 %32

Lenovo ThinkPad Yoga 370 Fan Replacement, Fan: passo 7, imagem 2 %32

Remove the four 2 mm screws holding the heatsink to the motherboard using the Phillips #00 screwdriver.

Editar

Passo 8

Disconnect the fan's bundled cable from the motherboard using a small set of tweezers or simply pull them out gently.
Pull evenly on the full width of the cable so that no individual wires are overly strained.

Editar

Passo 9

The fan is not ready to be removed yet. When lifting the fan from the frame, keep it within 2 inches from the motherboard until the attached wire is removed.
Lift the fan and heatsink from the motherboard; then flip both toward the motherboard.
Detach the wire from the perimeter of the fan casing.
Remove the fan and heatsink.