Lenovo ThinkPad Yoga 260 Repair Heat Sink Replacement

Remove the stylus from its port and set aside.

Using a Phillips #1 screwdriver, gently unscrew the eight 1.3 mm Phillips #1 screws until you hear an audible click.

Using a plastic opening tool, gently pry the bottom cover from the laptop.

Work the plastic opening tool around the edges of the bottom cover undoing all of the plastic clips, as shown in the picture.

Place your fingers around the edges of the cover and remove it.

Using your index fingers, gently remove the fan’s power connection.

Using a Phillips #1 screwdriver, remove the four 1.3 mm Phillips #1 screws and set them aside.

Using your index finger and thumb, gently pry the cooler from its mountings and remove the assembly.