Introdução

The back cover protects all the internal hardware of the device. In order to replace any components, the back cover must be removed. This guide will highlight how to remove the back cover safely.

Peças

Não são necessárias peças.

Ensure the device is off and unplugged.
  • Ensure the device is off and unplugged.

  • Remove the stylus from its port and set aside.

Adicionar comentário

Using a Phillips screwdriver, unscrew the 8 PH1 Phillips fasteners until you hear an audible click. The screws will not separate from the bottom cover when loose.
  • Using a Phillips screwdriver, unscrew the 8 PH1 Phillips fasteners until you hear an audible click.

  • The screws will not separate from the bottom cover when loose.

Adicionar comentário

The bottom cover is attached via several plastic clips located around the edges of the bottom cover. Using a plastic opening tool, gently pry the bottom cover from the laptop.
  • The bottom cover is attached via several plastic clips located around the edges of the bottom cover.

  • Using a plastic opening tool, gently pry the bottom cover from the laptop.

  • Work the plastic opening tool around the edges of the bottom cover undoing all of the plastic clips, as shown in the picture.

Adicionar comentário

Place your fingers around the edges of the cover and remove it. Place your fingers around the edges of the cover and remove it.
  • Place your fingers around the edges of the cover and remove it.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order

Uma outra pessoa concluiu este guia.

Daniel Fernandez

Member since: 14-02-2018

616 reputação

5 Guides authored

Equipe

USF Tampa, Team S2-G3, Eyestone Spring 2018 Membro de USF Tampa, Team S2-G3, Eyestone Spring 2018

USFT-EYESTONE-S18S2G3

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 19

Todo: 97