Conserte seus objetos Comunidade Loja

Lenovo Ideapad 110S-11IBR Touchpad Replacement

Introdução

This guide will allow any owner of a Lenovo Ideapad 110S-11IBR to undergo the process necessary to remove and replace the touchpad of the device to allow for removal. To do so, simply follow the given steps, starting with the removal of the back panel, then the battery, followed by a simply metal plate, and then the touchpad itself. To reassemble, simply follow the steps in reverse order.

O que você precisa

  1. Lenovo Ideapad 110S-11IBR Touchpad Replacement, Battery: passo 1, imagem 1 %32

    • Ensure that your device is completely OFF before performing this procedure.

    • Unscrew the eleven 4 mm Phillips #0 screws on the bottom of the device.

    Editar

  2. Lenovo Ideapad 110S-11IBR Touchpad Replacement: passo 2, imagem 1 %32 Lenovo Ideapad 110S-11IBR Touchpad Replacement: passo 2, imagem 2 %32

    • Separate the back lid from the laptop using a plastic opening tool.

    • Lift the back lid off of the device.

    Editar

  3. Lenovo Ideapad 110S-11IBR Touchpad Replacement: passo 3, imagem 1 %32 Lenovo Ideapad 110S-11IBR Touchpad Replacement: passo 3, imagem 2 %32

    • Remove the battery connector from its socket by pulling the cable away from the hinge using your fingers or a plastic opening tool.

    • Do not pull on the socket itself or you risk damaging the motherboard.

    • Remove the two pieces of tape that are holding the battery down.

    Editar

  5. Lenovo Ideapad 110S-11IBR Touchpad Replacement: passo 4, imagem 1 %32

    • Remove the five 4 mm Phillips screws securing the battery.

    Editar

  6. Lenovo Ideapad 110S-11IBR Touchpad Replacement: passo 5, imagem 1 %32 Lenovo Ideapad 110S-11IBR Touchpad Replacement: passo 5, imagem 2 %32

    • Lift the battery up and out of the device.

    Editar

  7. Lenovo Ideapad 110S-11IBR Touchpad Replacement, Touchpad: passo 6, imagem 1 %32

    • Use a Phillips #0 screwdriver to remove four 2.7 mm screws from the touch pad clicker assembly.

    Editar

  8. Lenovo Ideapad 110S-11IBR Touchpad Replacement: passo 7, imagem 1 %32

    • Remove the clicker assembly.

    Editar

  9. Lenovo Ideapad 110S-11IBR Touchpad Replacement: passo 8, imagem 1 %32 Lenovo Ideapad 110S-11IBR Touchpad Replacement: passo 8, imagem 2 %32

    • Use a plastic opening tool to remove the touch pad.

    • Time must be taken to work the adhesive without causing damage to the touch pad.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Samaa Aldar

Membro desde: 04/06/19

181 Reputação

Autoria de 2 guias

Emblemas: 2

Equipe

IUPUI, Team S11-G11, Wilson Spring 2019 Membro de IUPUI, Team S11-G11, Wilson Spring 2019

IUPUI-WILSON-S19S11G11

Membros da 2

Autoria de 6 guias

Um comentário

i appreciate the tear down. I would like to see the screws that came out of the holes instead of empty screw holes though.

daldal - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 16

Duração total: 1,264