Lenovo IdeaPad Flex 6-14IKB SSD Card Replacement

Introdução

This guide will walk you through the steps of removing the SSD card. The SSD card is essential to the Lenovo IdeaPad Flex 6-14IKB because it allows for the laptop to obtain storage and the memory of the device.

O que você precisa

Passo 1 Base Cover

Lenovo IdeaPad Flex 6-14IKB SSD Card Replacement, Base Cover: passo 1, imagem 1 %32

Remove the ten 6.5 mm screws that secure the base cover using a T5 Torx screwdriver.

Editar

Passo 2

Use the plastic opening tool to pry in the seam between the bottom cover and the rest of the laptop.
The goal is to unhook the plastic hooks that secure the bottom cover.
Work your way around the bottom cover of the laptop in a clockwise rotation until every clip is free.
You will feel and hear a clicking noise when the clips are undone.

Editar

Passo 3 SSD Card

Lenovo IdeaPad Flex 6-14IKB SSD Card Replacement, SSD Card: passo 3, imagem 1 %32

Remove the single 3.5 mm screw that secures the SSD card using a Phillips #00 screwdriver.

Editar

Passo 4

Ferramenta utilizada nesse passo:

Tweezers

$4.99

Comprar

Use tweezers to gently pry up the protective cover off of the SSD card.

Editar

Passo 5

Remove the single 3.5 mm screw that secures the SSD card using a Phillips #00 screwdriver.
The SSD card will spring up to one side on its own.

Editar

Passo 6

Remove the SSD from the motherboard.
When reinstalling the SSD, push the SSD card back into its slot. The SSD card will click into place when it is secure and then rest at a 30 degree angle from the laptop.

Editar