Lenovo IdeaPad Flex 4-1130 Touchpad Replacement

Escrito Por: Adrian Miranda (e outro colaborador)

Comentários: 0
Favoritos: 0

Lenovo IdeaPad Flex 4-1130 Touchpad Replacement

Dificuldade

Moderado

Passos

Tempo necessário

15 minutos

Introdução

If you are experiencing a delay between touching the touchpad and actual movement of the mouse on screen or a complete lack of mouse movement, a touchpad replacement might be needed.

Ferramentas

Comprar estas ferramentas

Phillips #0 Screwdriver

US$6,99

Comprar
Spudger

US$2,99

Comprar

Peças

Nenhum componente especificado.

Passo 1 Battery

Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.

Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.
Remove the ten 4mm screws from the back panel.

Editar

Passo 2

Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.

Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.
Do not insert the spudger too deep! This could potentially damage a device part.

Editar

Passo 3

Remove the connector attaching the battery to the motherboard.

Remove the connector attaching the battery to the motherboard.

Editar

Passo 4

Remove the four 4mm screws on the battery.

Remove the four 4mm screws on the battery.

Editar

Passo 5

Lift the battery with a spudger and remove.

Lift the battery with a spudger and remove.

Editar

Passo 6 Motherboard

Remove eleven 6mm screws.

Editar

Passo 7

Lift up black flap on the ZIF connector and pull the ribbon cable out.

Lift up black flap on the ZIF connector and pull the ribbon cable out.

Editar

Passo 8

Lift up on the black tab on the ZIF connector and pull the ribbon cable out.

Lift up on the black tab on the ZIF connector and pull the ribbon cable out.

Editar

Passo 9

Remove connector cable.

Editar

Passo 10

Remove one last connector cable.
Motherboard should now be completely disconnected and can be lifted off the cover to be replaced.

Editar

Passo 11 Touchpad

Due to the amount of force required to remove the screws holding the touchpad, we recommend removing the motherboard before attempting this replacement to reduce the chances of damaging any components.

Due to the amount of force required to remove the screws holding the touchpad, we recommend removing the motherboard before attempting this replacement to reduce the chances of damaging any components.
Lift up the black tab on the ZIF connector and pull the ribbon cable out.

Editar